The running of an engine is one of the most important periods of the life of a car. In that first stage, it will be when certain mechanical behavior patterns set that it is important to keep in mind. It should remember that a well-rounded car consumes less fuel, less oil, performs more, and reduces the likelihood of damage.
In the most recent engines, the recommended taxiing is between 1,000 and 1,500 kilometers for one of gasoline and between 2,000 and 3,000 for one diesel. In this process, it sought that the different parts fit together correctly, especially the pistons and the segments, responsible for determining the actual compression of the engine and the oil consumption, as well as the bushings, which influence the pressure of the circuit of grease.
The recommendations of the manufacturers are very clear that seek to increase, in a constant and progressive way. The speed of rotation of the engine and the load, regulated by the accelerator. It is necessary not to turn the engine at high revolutions, not to drive for a long time at the same speed or with the accelerator pedal pressed fully and not towing trailers during the taxi period.
In addition to following the builders’ instructions, several behaviors can follow behind the wheel to make the most of this stage. For example, never step on the gas fully, if not progressively. In addition, frequent accelerations must be made and the change used a lot for reductions.
In the same way, it is also preferable to take the car high in turns, at the gas tip, then low and with the pedal pressed to the end. Temperature is another aspect to take into account, taking care of it to allow the pieces to expand and contract properly. For the engine to reach its optimum operating temperature, it is better to avoid short trips and allow it to cool completely before shutting it down. Besides, if you turn on the 9140 led headlight bulb for a long time, it is better to avoid long trips and to cool it completely.